suit-leds/suit-leds-arduino
1
0
Fork 0
Code Releases Activity

got interrupts working

Browse Source
This commit is contained in:
Keiran Snowden
2019-03-15 22:10:38 -04:00
parent 797f5c8743
commit fe7ac2ff42
2 changed files with 42 additions and 165 deletions
Download Patch File Download Diff File Expand all files Collapse all files

160
neopixel-keiran.ino
View File

@@ -6,8 +6,6 @@
#include "Adafruit_BluefruitLE_SPI.h"
#include "Adafruit_BluefruitLE_UART.h"
#include "math.h"
#if SOFTWARE_SERIAL_AVAILABLE
#include <SoftwareSerial.h>
#endif
@@ -26,42 +24,58 @@ extern uint8_t packetbuffer[];
Adafruit_BluefruitLE_SPI ble(BLUEFRUIT_SPI_CS, BLUEFRUIT_SPI_IRQ, BLUEFRUIT_SPI_RST);
void bluefruit_setup(){
Serial.print(F("Initialising the Bluefruit LE module: "));
volatile boolean irq_event_available = false;
void DfuIrqHandle(void) {
irq_event_available = true;
}
void bluetooth_setup(){
Serial.print(F("Initialising the Bluefruit LE module"));
if ( !ble.begin(VERBOSE_MODE) ) {
Serial.println(F("Couldn't find Bluefruit, make sure it's in CoMmanD mode & check wiring?"));
while(1); // halt
}
Serial.println( F("OK!") );
if ( FACTORYRESET_ENABLE ) {
/* Perform a factory reset to make sure everything is in a known state */
Serial.println(F("Performing a factory reset: "));
Serial.println(F("Performing a factory reset"));
if ( ! ble.factoryReset() ){
Serial.println(F("Couldn't factory reset"));
while(1); // halt
}
}
ble.println(F("AT+GAPDEVNAME=Suit LEDs"));
pinMode(BLUEFRUIT_SPI_IRQ, INPUT_PULLUP);
attachInterrupt(digitalPinToInterrupt(BLUEFRUIT_SPI_IRQ), DfuIrqHandle, FALLING);
ble.echo(false); // disable command echo
ble.sendCommandCheckOK(F("AT+GAPDEVNAME=Suit LEDs")); // Change name displayed in bluetooth scans
ble.sendCommandCheckOK(F("AT+DFUIRQ=on")); // Change DFU Pin to IRQ Mode
ble.verbose(false); // disable debug info
//Serial.println("Requesting Bluefruit info:");
//ble.info();
ble.setConnectCallback(on_connect);
ble.setDisconnectCallback(on_disconnect);
ble.setBleUartRxCallback(on_rx);
ble.setMode(BLUEFRUIT_MODE_DATA);
Serial.println(F("Bluetooth ready"));
}
void bluetooth_wait(){
Serial.println(F("Waiting for bluetooth to connect..."));
while (! ble.isConnected()) {
delay(500);
}
Serial.println(F("Connected"));
ble.setMode(BLUEFRUIT_MODE_DATA);
//Serial.println(F("Connected. Switched to DATA mode."));
void on_connect(){
Serial.println(F("on_connect"));
}
void on_disconnect(){
Serial.println(F("on_disconnect"));
}
void on_rx(){
Serial.println(F("on_rx"));
/*uint8_t len = readPacket(&ble, BLE_READPACKET_TIMEOUT);
if (len == 0) return;
Serial.println(F("data"));
if (packetbuffer[1] == 'P'){
Serial.println(char(packetbuffer[2]));
} else {
printHex(packetbuffer, len);
}*/
}
uint32_t pack_color(uint8_t r, uint8_t g, uint8_t b) {
//r = r >> 6;
//g = g >> 6;
//b = b >> 6;
return ((uint32_t)r << 16) | ((uint32_t)g << 8) | b;
}
uint32_t pack_color(uint8_t r, uint8_t g, uint8_t b, uint8_t w) {
@@ -80,17 +94,6 @@ uint8_t white(uint32_t color){
return (color >> 24) & 0xFF;
}
/* jesus fuck.. save my eyes */
/*uint32_t dim_color(uint32_t color){
return pack_color(
red(color) / DIM_FACTOR,
green(color) / DIM_FACTOR,
blue(color) / DIM_FACTOR,
white(color) / DIM_FACTOR
);
}*/
class Strip {
private:
uint8_t pin;
@@ -99,14 +102,6 @@ class Strip {
unsigned long last;
uint8_t offset;
Adafruit_NeoPixel pixel;
/*uint32_t pattern[6] = {
pack_color(255, 0, 0), // 0 degrees, red
pack_color(255, 255, 0), // 60 degrees, yellow
pack_color(0, 255, 0), // 120 degrees, green
pack_color(0, 255, 255), // 180 degrees, cyan
pack_color(0, 0, 255), // 240 degrees, blue
pack_color(255, 0, 255) // 300 degrees, magenta
};*/
public:
Strip(uint8_t led_pin, uint8_t strip_len, uint16_t wait_ms) {
@@ -128,79 +123,6 @@ class Strip {
pixel.show();
}
/*private:
uint32_t avg_bias(uint32_t col1, uint32_t col2, float perc){
uint8_t w1 = white(col1);
uint8_t r1 = red(col1);
uint8_t g1 = green(col1);
uint8_t b1 = blue(col1);
uint8_t w2 = white(col2);
uint8_t r2 = red(col2);
uint8_t g2 = green(col2);
uint8_t b2 = blue(col2);
float remain = 1.0 - perc;
return pack_color(
(uint8_t)(remain * r1 + perc * r2),
(uint8_t)(remain * g1 + perc * g2),
(uint8_t)(remain * b1 + perc * b2),
(uint8_t)(remain * w1 + perc * w2)
);
}
private:
uint32_t trig_hue(uint8_t pix_index){
uint8_t r = (uint8_t)(sin(PI * (pix_index + 72) / 96) * 255);
uint8_t g = (uint8_t)(sin(PI * (pix_index + 12) / 96) * 255);
uint8_t b = (uint8_t)(sin(PI * (pix_index + 144) / 96) * 255);
Serial.print(r);
Serial.print(',');
Serial.print(g);
Serial.print(',');
Serial.print(b);
Serial.println();
return dim_color(pack_color(r, g, b));
}
private:
void cycle_trig_fade(){
pixel.begin();
for (uint8_t led_index=0; led_index<num_pixels; led_index++){
pixel.setPixelColor(led_index, trig_hue(led_index));
}
pixel.show();
}
private:
void cycle_fade(){
pixel.begin();
for(uint8_t led_index=0; led_index<num_pixels; led_index++){
float index_float = 6.0 * led_index / num_pixels;
uint8_t index_int = int(index_float);
uint32_t color_val;
if (index_int == index_float){
color_val = pattern[index_int];
} else {
uint8_t index_upper = index_int + 1;
if (index_upper >= 6){
index_upper = 0;
}
float percent = index_float - index_int;
color_val = avg_bias(pattern[index_int], pattern[index_upper], percent);
}
if (offset >= 144){
continue;
}
uint8_t loc;
if (offset + led_index > num_pixels - 1){
loc = led_index + offset - num_pixels + 1;
} else {
loc = offset + led_index;
}
pixel.setPixelColor(loc, dim_color(color_val));
}
pixel.show();
}*/
private:
void rainbow(){
uint8_t r = 255;
@@ -255,8 +177,6 @@ class Strip {
unsigned long now = millis();
if (now - wait > last){
last = now;
//cycle_trig_fade();
//cycle_fade();
rainbow();
offset += 1;
if (offset == num_pixels){
@@ -271,20 +191,14 @@ Strip strip = Strip(6, 144, 100);
void setup(void) {
while (!Serial); // required for Flora & Micro
Serial.begin(115200);
bluefruit_setup();
bluetooth_setup();
strip.off();
Serial.println(F("setup() finished"));
bluetooth_wait();
}
void loop(void) {
strip.update();
uint8_t len = readPacket(&ble, BLE_READPACKET_TIMEOUT);
if (len == 0) return;
Serial.println(F("data"));
if (packetbuffer[1] == 'P'){
Serial.println(char(packetbuffer[2]));
} else {
printHex(packetbuffer, len);
if (irq_event_available) {
ble.handleDfuIrq();
}
strip.update();
}